MFB1 MFZ1 Series MFB1-7YC 220 AC220 VDC24V Hydraulic Solenoid Coil

Electromagnets for hydraulic valves MFB1-7yc ◆ Description This series of electromagnets is suitable for AC power supply and control circuits with voltage up to 220V. As a power component of hydraulic electromagnetic directional valve in machine tools and automation systems. This product is matched with a joint design type 10 diameter screw connected electromagnetic directional valve. ◆ Normal working conditions Can be installed in any direction. There should be no gas or dust in the operating environment that is sufficient to corrode metals and damage insulation. Otherwise, it may affect the product's lifespan. Electromagnets are suitable for long-term and intermittent cycle working systems. The reasonable fluctuation range of power supply voltage is 85% -110% (special requirements can be proposed when ordering). The enclosure protection level is IP65.

product-800-139

◆ Structure
The suction coil is wound, with a protection level of IP00;
The suction coil is mainly made by winding the coil skeleton, enameled wire, and insulating paper.
When the coil is energized, the iron core is pulled in, and when the power is cut off, the iron core is released. Achieve control circuit effect.
Technical characteristics
The pull-in coil operates reliably at a voltage not lower than 85% of the rated voltage and not higher than 110% of the rated voltage.
◆ Installation
Before installation, attention should be paid to whether the rated voltage, model, and specifications of the coil match the entire machine.
◆ Use
Check if the power wiring is secure before use;
Before use, test whether the iron core and coil match, and whether the movable bracket is flexible.