Ningbo Lainuo Hydraulic Technology Co., Ltd.
+8615750963417
Rexroth A11VO190 A11VO260 Hydraulic Piston Pump Series A11VO190LRDH1/11R-NZD12K83 Rexroth Hydraulic Pump
video

Rexroth A11VO190 A11VO260 Hydraulic Piston Pump Series A11VO190LRDH1/11R-NZD12K83 Rexroth Hydraulic Pump

The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt.) – see the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 140 °F (60 °C) is set. In the optimum operating viscosity range (νopt; shaded area) this corresponds to the viscosity classes VG 46 and VG 68; to be selected: VG 68 Limits of viscosity range The limiting values for viscosity are as follows: νmin = 42 SUS (5 mm2/s) Short-term (t < 3 min) At max. perm. temperature of tmax = 240 °F (+115 °C). νmax = 7400 SUS (1600 mm2/s) Short-term (t < 3 min) At cold start (p ≤ 435 psi (30 bar), n ≤ 1000 rpm, tmin = -40 °F (-40 °C)). Only for starting up without load. Optimum operating viscosity must be reached within approx. 15 minutes. Note that the maximum hydraulic fluid temperature of 240 °F (115 °C) must not be exceeded locally either (e.g. in the bearing area).The temperature in the bearing area is – depending on pressure and speed – up to 9°F (5 K) higher than the average case drain temperature. Special measures are necessary in the temperature range from -40 °F (-40 °C) and -13 °F (-25 °C) (cold start phase) , please contact us. For detailed information about use at low temperatures, see RE 90300-03-B.

Send Inquiry

(0/10)

clearall