PARKER F11 Small Frame Fixed Displacement Bent-Axis Pumps F11005 F11006 F11010 F11012 F11014 F11019 Hydraulic Pump

PARKER F11 Small Frame Fixed Displacement Bent-Axis Pumps F11005 F11006 F11010 F11012 F11014 F11019 hydraulic pump 2. The inlet and outlet of the oil pump must be loaded with combined gaskets, and the pipe joint must be sealed well. Replace clean hydraulic oil and oil suction filter screen, so as to avoid running air. 3, injection of oil, pipeline all connected, to the first pressure regulating valve to the lowest, idling for 10 minutes and then began to slowly raise the pressure to 5 mpa 5 minutes, 5 minutes later to lift the required working pressure, so that the residual air displacement in the pump and pipeline. This can increase the service life of the oil pump 4, the oil must be clean, the oil suction filter should be replaced in time, too much oil impurities to the plunger pump inside the plunger spoiled there is no warranty. Do these four points, can greatly improve the service life of the plunger pump!

20220711160354

PARKER F11 Small Frame Fixed Displacement Bent-Axis Pumps F11005 F11006 F11010 F11012 F11014 F11019 hydraulic pump

Series F11

F11 is a bent-axis, fixed displacement motor/pump. It can be used in numerous applications in both open and closed loop circuits. The F11 series is available in sizes 5, 6, 10, 12, 14 and 19 cc.

F11 Features

• Max intermittent pressure up to 420 bar and continuous operating pressure up to 350 bar

• Thanks to low weight pistons and a compact design of the rotating parts, the F11 tolerates very high speeds, up to 14000 rpm

• CETOP, ISO, SAW and SAE versions

_20200103163646_