Parker Denison Hydraulic Pump T6H20C-M17-4R1C-0L000-00 Hydraulic Piston Motor T6H20C 028 1R1C 2L0M0 10

Parker denison hydraulic pump T6H20C-M17-4R1C-0L000-00 hydraulic piston motor T6H20C 028 1R1C 2L0M0 10 The hybrid pump is a combination of fixed displacement vane pump B, C, D cartridges combined with a variable cartridge of PV20 or PV29 piston pump. The cartridges are driven by a common shaft without coupling in between they have a large common suction port and two or three independant outlet ports : One for the piston, one or two for the vane pump. These pumps have very compact displacement and are under all actual pump sizes of the market. T6H20B = 42,9 ml/rev variable + 5,8 to 50,0 ml/rev fixed T6H20C = 42,9 ml/rev variable + 10,8 to 100,0 ml/rev fixed T6H29B = 61,9 ml/rev variable + 5,8 to 50,0 ml/rev fixed T6H29C = 61,9 ml/rev variable + 10,8 to 100,0 ml/rev fixed T6H29D = 61,9 ml/rev variable + 47,6 to 158,0 ml/rev fixed

Parker denison hydraulic pump T6H20C-M17-4R1C-0L000-00 hydraulic piston motor T6H20C 028 1R1C 2L0M0 10

1.Check speed range, pressure, temperature, fluid quality, viscosity and pump rotation. 2.T6H pump case pressure should not exceed 0,7 bar (see datas). 3.Check inlet conditions of the pump, if it can accept application requirement. 4.Type of shaft : if it would support operating torque. 5.Coupling must be chosen to minimize pump shaft load (weight, misalignment). 6.Filtration : must be adequate for lowest contamination level. 7.Environment of pump : to avoid noise reflection, pollution and shocks. 8. Although the T6H pumps have fast off stroke compensator reponse, system relief valves are recommended for safety considerations. 9. When constantly under pressure with no flow requirements, it is safer to flush the piston pump. Three drains holes are there for this purpose