Characteristic operating pressure: 240bar (3500ps) Flow: see performance chart Internal leakage: at 240bar (3500ps), The maximum value is 0.15 ml/min (3 drops/min, temperature range: - 40 ℃ to 120 ℃, rated load of standard nitrile rubber sealed coil: it can work continuously within the range of 85% to 115% of the rated voltage. Response time: when the voltage is 100%, and the flow is 80% of the rated value, the time for the first indication of state change: power on: 110 ms; power off: 40 ms. Initial current of the coil at 20 ℃: 1.67 A at 12VDc for standard coil, and 018 A at 15VAC (full wave rectification). Type E coil: 1.7 A at 12VocC; 085 A at 24vDc Minimum pull in voltage: 85% of rated value at 207bar (3000ps) Filtration: see 9010.1 Medium: mineral oil with viscosity between 74~420cSt (50~2000s3) or synthetic oil with lubricating effect Installation: no limit, see 90201 Valve hole: vc122; Refer to 9.112.1 Model of valve hole cutter: CT122XX; Refer to 86001 seal assembly model: SK122XT; Refer to 8.650.1 Coil nut: part number 7,004,420; For Type E coils manufactured before January 1, 2004, see the coil nut information on page 3400.1.
