KOMPASS VD1-30F-A1 VD1-30F-A2 VD1-30F-A3 VE1-40F-A1 VE1-40F-A2 VE1-40F-A3 Vane Pump Hydraulic Oil Pump

The design of "shaft clearance compensation" can automatically adjust the pump displacement based on the set pressure. 2. Equipped with a built-in pressure regulating valve, the system does not require the installation of a pressure regulating valve. 3. Easy to assemble, it can be directly connected to a motor pump combination. 4. Suitable for use in grinding machines, automatic lathes, work machines, shoe making machinery, and various other * * * machines or single energy machines. Direction of rotation: Clockwise direction (viewed from the end of the bundle) is the standard, only this direction is available. The confirmation of the rotation direction can be checked by instantaneously starting the motor. Hydraulic oil: below 7MPa, use hydraulic oil with a viscosity of 20-50cSt (ISOVG32) at 40 ℃ Pressure of the drain pipe: The drain pipe must be directly inserted under the oil level of the oil tank, and the back pressure generated by the light distribution should be maintained below 0.03MPa. Working oil temperature: The temperature for continuous operation is 15-60 ℃

product-800-139

Axis fit: The eccentricity error between the pump shaft and the motor is 0.05mm, and the angle error is 1 °
Oil suction pressure: The pressure at the oil suction port is -0.03MPa~0.03MPa
Displacement adjustment: When adjusting the displacement, first loosen the adjusting nut, then rotate the adjusting bolt, turn right to reduce the flow, and turn left to increase. After the adjustment is completed, please tighten the nut.
Pressure adjustment: Turn left (counterclockwise) to adjust the pressure bolt to reduce the output pressure, and turn right (clockwise) to increase it. After adjustment, please tighten the nut
New machine operation: When the new machine starts running, the motor should be repeatedly started without pressure to exhaust the air in the pump and oil suction pipe. To ensure that the air in the system is discharged, it can be continuously operated for 10 minutes without load

VB -