PVPC PVPC-C Series Made in Italy Hydraulic Pump Original PVPC-C-5059/01D 11

The total reciprocating travel L of the ATOS plunger pump plunger is constant, determined by the lift of the cam. The amount of oil supplied by the plunger per cycle depends on the oil supply stroke, which is variable without the control of the camshaft. The starting time of fuel supply does not change with the change of fuel supply stroke. Turning the plunger can change the timing of the end of the oil supply, thereby changing the amount of oil supplied. During the operation of the plunger pump, under the action of the cam on the camshaft of the fuel injection pump and the plunger spring, the plunger is forced to reciprocate up and down, thereby completing the oil pumping task. The oil pumping process can be divided into the following three stages.
The ATOS plunger pump adopts a dual plunger structure, with small pressure pulsation and long service life of the gemstone ball; Imported gemstone plungers and gemstone balls are used to ensure accurate flow. Communicate with the computer through the RS232 interface, which can be directly controlled by the computer; The contact medium material is resistant to organic solvent corrosion; Large screen LCD display; The carefully designed exhaust device effectively removes air bubbles from the conveyed liquid. The flow and pressure settings can be memorized and can be communicated with PLC (customized) to display the current pressure, set pressure, and set flow in real time; The real-time curve display pump working pressure can be set in two ways, fast and practical; With timing function, it is convenient to set the working time of the pump