NACHI PVS-1B-16 PVS-1B-22 PVS-1B-35 Hydraulic Pump Repair Kit Spare Parts

NACHI Hydraulic Pump Repair Kit Spare Parts The operating temperature range is 5 to 60°C. When the oil temperature at startup is 5°C or less, warm up the hydraulic pump by low-pressure, low-operation speed operation until the oil temperature reaches 5°C. cProvide a suction strainer with a filtering grade of about 100μm (150 mesh). Besure to provide a return line filter of grade 20μm or less on the return line to the tank. (When the hydraulic pump is used at ahigh pressure of 14 MPa or more, we recommend providing a filter of 10μm or less. vManage the hydraulic operating fluid so that contamination is maintained at class NAS10 or lower. bUse hydraulic operating fluid within an operating ambient temperature of 0 to 60°C.

NACHI PVS-1B-16 PVS-1B-22 PVS-1B-35 Hydraulic Pump Repair Kit Spare Parts

cMake sure that the pump operates in the direction of rotation the same as that indicated by the arrow on the pump body. vAir entering to the pump or pipes may cause noise or vibration. At startup, set the pump discharge side to a no-load state, and operate the pump in the inching mode to release any air in the pump or pipes. bProvide an air bleed valve in circuits where it is difficult to release air at startup