Trade Assurance HNC EBG-03-H-R F9 Solenoid Valve Pilot Relief Valve Electro-hydraulic Proportional Valve EBG-03-C-R EBG-06-H-L

(HNC) Vertical direct acting proportional overflow valve EDG-01-H EDG-01, EDG-01-H, EDG-01-C, and EDG-01-B electro-hydraulic proportional pilot overflow valves are supplied by Suzhou Electromechanical Co., Ltd. EDG-01,EDG-01-H,EDG-01-C,EDG-01-B. EDG-01,EDG-01-H-T,EDG-01-C-T,EDG-01-B-T Brand HNC Model EFBG-03-160 1. The electro-hydraulic proportional pilot relief valve EDG is composed of a small DC proportional electromagnet and a direct acting relief valve, which is sensitive in response, high in accuracy, and good in linearity. HNC solenoid valve EBG-03-H-R vertical proportional valve Taiwan HNC electro-hydraulic proportional pressure flow control valve characteristics: 1. This valve is a proportional valve that controls the pressure and flow of the hydraulic system using two electrical signals; This valve controls pump pressure with a small differential pressure load pressure, and is an energy-saving valve. 2. Because this valve can control the pressure of the pump based on the load pressure and keep the pressure difference small, it is a low energy consumption, energy-saving, oil inlet control throttle type speed regulating valve. 3. This valve has a temperature supply function, which can stabilize the control flow without being affected by the oil temperature. 4. During initial use, it is necessary to exhaust gas on the pressure coil and flow coil

product-800-139

Electro-hydraulic proportional pilot relief valve EDG is suitable for automation systems with many levels of pressure changes.
3. Electrohydraulic proportional pilot relief valve EDG is widely used in high-performance machines such as injection molding machines.
The electrohydraulic proportional pilot overflow valve EDG has the following models: EDG-01-B, EDG-01-C, EDG-01-H, EDG-01-B-T, EDG-01-C-T, and EDG-01-H-T.
Instructions for use: 1. Electro-hydraulic proportional pilot overflow valve EDG: As long as the exhaust port is ensured to be upward, the position of the exhaust port can be arbitrarily changed as needed.
2. The electro-hydraulic proportional pilot overflow valve EDG discharges air: To maintain stable control, it is necessary to exhaust all air and fill the iron core of the solenoid valve with oil. To exhaust air, gradually loosen the exhaust port at the proportional valve end. The position of the exhaust port can be changed so that air can be easily discharged from the valve. To change the position of the exhaust port, rotate the electromagnet connector until the exhaust port reaches the desired position.
3. Electro-hydraulic proportional pilot relief valve EDG oil return and drain pipes: The back pressure of the oil return and drain pipes directly affects the operating force of the main valve core of the low regulating pressure or flow regulating valve. Therefore, it is not allowed to connect the oil return pipe with other pipes, as it should be directly connected to the oil tank to keep the back pressure as low as possible. In addition, ensure that the ends of the return and drain pipes are immersed in the oil.

HNC