Kompass MBP-02 MCP-02B MPW-02C MRP-02B MSW-02-X Relief Modular Valves MPW-02C MPW-02B MPW-02C Hydraulic Valve

Hydraulic pressure is a way of energy transmission and control that depends on the hydraulic pressure to do work. As we all know, hydraulic system has a very high work weight ratio (energy that can be transmitted by the same weight), which is widely used in industrial machinery and walking machinery. It is called industrial hydraulic pressure and walking hydraulic pressure respectively. Due to the progress of technology, more and more hydraulic transmission has replaced other transmission methods (mechanical transmission and electric transmission). During the delivery of the product, the volumetric efficiency, mechanical efficiency and leakage characteristics of the hydraulic pump, the operating sensitivity of the hydraulic valve, the action coordination of each valve, the volumetric efficiency of the motor, and the leakage of the oil cylinder are all parameters that must be known. All kinds of factory test reports are of course the technical data required by customers. The following is a valve test report. The corresponding test equipment can quickly collect various technical indicators and generate curves, which reflects the customer's needs.

Because of the complexity and inaccuracy of fluid mechanics and the unknown characteristics of materials, hydraulics is an experimental science. In the research and development stage, from the fatigue test of materials to the fluid performance test of hydraulic components (pumps, valves, motors, cylinders, hydraulic accessories, etc.), all its indicators cannot be separated from testing. Hydraulic components that have not been tested are unknown, and their performance parameters are fuzzy, Many specific indicators are uncertain, and only after many tests and changes in design ideas and methods, and a good combination of relevant elements, can a possible excellent product be created. Like the following equipment, all noise sources are shielded, which is very necessary for the noise detection of the pump or motor.

In the repair environment, if a defective hydraulic pump, valve, cylinder, or motor can be debugged on the machine, it is easy to find out the problem. Especially for the hydraulic system of construction machinery, if it has the ability to detect a single element when there is a problem, it can quickly determine the problem element. Because the current hydraulic system is quite complex, which may also be caused by car holding, pumps, valves, oil filters, etc, If we blindly suspect that a certain part of it will obviously expand the fault if it is not operated properly, making the original non problem component become a victim and a problem component. At this time, if we can isolate the suspected component and put it into a monitored system for inspection, this situation is equivalent to that a person with a fracture needs to find out the problem through X-ray after entering the expert clinic of the hospital.