![]()

Hydraulic Fluids Use antiwear industrial hydraulic oils or automotive crankcase oils having letter designations SC, SD, SE or SF with viscosity grades of 32 to 68 cSt at 40° C (140° F). Preferred viscosity at rated speed and pressures: Minimum 13 cSt (70 SUS) Maximum 54 cSt (251 SUS) Minimum 49°C (120°F) Maximum 65°C (150°F) Cold Starts When operating with SAE 10W oil in the 860 to 54 cSt (4000 to 251 SUS) range, the speed and pressure should be limited to 50% or less of their respective rated values until the system has warmed up. Extreme caution must be used when starting units when fluid viscosities are greater than 860 cSt (4000 SUS). Care should be exercised to warm up the entire system, including remote cylinders and motors.




![]()

![]()

![]()

















