Eaton 101 106 104 158 109 Char Lynn 106-1012-006 Hydraulic Motor 106-1039-006 106-1040-006 106-1041-006

For more detailed information, please contact Eaton Corp. Hydraulics Division 15151 Highway 5 Eden Prairie, MN 5534 • Specifications and performance data, Catalog No. 11-885 • When servicing H Series Motors refer to Repair Information No. 7-117. This repair manual lists tools required, and step by step disassembly and reassembly procedures.

Tools required for both disassembly and reassembly • Torque wrench (34Nm [300 lb-in] capacity) • 300-400mm [12-16 in.] breaker bar • 5/16 in.–12 point socket no. 5422 (Heavy Duty 56Nm [500 lb-in] capacity) • E10 Torx socket • Small screwdriver (150-200 x 6mm [6-8 x 1/4 in.] flat blade), see page 9 for tooling information. • 5mm [3/16 in.] hex key • Shaft pressure seal installation tool for 007, 008 and 009 motors • Seal sleeve or bullet (1 in. dia. shaft, 7/8 in. dia. shaft)

101..