Rexroth FACTORY PRICE Axial Piston Variable Pump A7VO Series 63 Sizes 28 To 160

Rexroth FACTORY PRICE Axial piston variable pump Characteristics ▶ Variable pump with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open circuit ▶ For use in mobile and stationary applications ▶ Flow is proportional to the drive speed and displacement. ▶ The flow can be steplessly changed by adjusting the bent axis. ▶ Wide selection of control devices ▶ Compact, robust pump with a long service life

Rexroth FACTORY PRICE Axial piston variable pump A7VO Series 63 Sizes 28 to 160.1

The A7VO variable pump is designed for operation with HLP mineral oil according to DIN 51524. Application instructions and requirements for hydraulic fluids should be taken from the following data sheets before the start of project planning: ▶ 90220: Hydraulic fluids based on mineral oils and related hydrocarbons ▶ 90221: Environmentally acceptable hydraulic fluids ▶ 90222: Fire-resistant, water-free hydraulic fluids (HFDR/HFDU) ▶ 90223: Fire-resistant, water-containing hydraulic fluids (HFC, HFB, HFAE, HFAS) Details regarding the selection of hydraulic fluid The hydraulic fluid should be selected such that the operating viscosity in the operating temperature range is within the optimum range (νopt, see selection diagram). Note At no point of the component may the temperature be higher than 115 °C. The temperature difference specified in the table is to be taken into account when determining the viscosity in the bearing. If it is not possible to maintain the conditions above due to extreme operating parameters, we recommend flushing the case at port U

133