Rexroth A10VO40 A10VO43 A10VO180 A10VO28 A10VO45 A10VO71 A10VO63 Series A10VO180DRG/32R-VSD72U99 High Pressure Piston Pump

Rexroth A10VO40 A10VO43 A10VO180 A10VO28 A10VO45 A10VO71 A10VO63 series A10VO180DRG/32R-VSD72U99 high pressure piston pump 2. The inlet and outlet of the oil pump must be loaded with combined gaskets, and the pipe joint must be sealed well. Replace clean hydraulic oil and oil suction filter screen, so as to avoid running air. 3, injection of oil, pipeline all connected, to the first pressure regulating valve to the lowest, idling for 10 minutes and then began to slowly raise the pressure to 5 mpa 5 minutes, 5 minutes later to lift the required working pressure, so that the residual air displacement in the pump and pipeline. This can increase the service life of the oil pump 4, the oil must be clean, the oil suction filter should be replaced in time, too much oil impurities to the plunger pump inside the plunger spoiled there is no warranty. Do these four points, can greatly improve the service life of the plunger pump!