Made In China MARZOCCHI Series Hydraulic Gear Pump ALP3-D-50 Hydraulic Gear Pump

MARZOCCHI gear pump has six series, and the displacement of each series can be selected. The same series can provide different flanges and forms of shaft oil introduction. ALP3-D-50 gear pump is a circulating pump that transfers liquid or pressurizes it depending on the volume change and movement between the pump cylinder and the meshing gear. It is a closed space composed of two gears, pump body, front and rear covers. When the gear rotates, the volume of the space on the side where the gear is disengaged increases accordingly, forming a vacuum to suck in the liquid. The space volume on the meshing side of the gear changes from large to small, and is squeezed into the pipeline. The discharge pressure of the gear pump is completely determined by the pump source resistance

The characteristics of ALP3-D-50 gear pump are: good hydraulic performance, high mechanical efficiency, low noise level, not only that, but also small size, small volume, etc. MARZOCCHI gear pump is applicable to industrial and mobile fields. Under normal conditions, these gear pumps generally have two aluminum bushings, a special bushing compensation belt, which is insulated by a special preformed seal reverse extrusion ring body, allowing the bushing to move freely in axial and radial movements. With the same method, different flanges and equal shaft oil inlets can be provided

ALL