Ningbo Lainuo Hydraulic Technology Co., Ltd.
+8615750963417
Pvs Series Pvs-2b-35n3-12 Pvs-2b-35n1-12 Pvs-2b-35n2-12 PVS-2B-35N0-12 Pzs-3b-70n4-10
video

Pvs Series Pvs-2b-35n3-12 Pvs-2b-35n1-12 Pvs-2b-35n2-12 PVS-2B-35N0-12 Pzs-3b-70n4-10

Hydraulic internal double gear pump Nachi Before you start pump operation, fill the pump body with clean hydraulic operating fluid via the lubrication port. An unload is required when the motor is started under condition WYE.Delta Start. Consult your agent regarding the circuit. Make sure that the pump operates in the direction of rotation the same as that indicated by the arrow on the pump body. Air entering the pump or pipes may cause noise or vibration. At startup, set the pump discharge side to a no-load state, and operate the pump in the inching mode to release any air in the pump or pipes. Provide an air bleed valve in circuits where it is difficult to release air at startup. • How to Set Pressure and Discharge Volume The default pump discharge volume is set to "maximum" and default discharge pressure is set to "minimum". Change the discharge volume and discharge pressure settings according to your particular operating conditions.

Send Inquiry

(0/10)

clearall